Rational CombiMaster CM Manuel d'utilisateur télécharger pdf (Page 8)

-8-

Key code CM from 04 - 2004

CLEn

CALC

A) Cool down cabinet below 60°C

B) Spray inside cabinet with Rational cleaner

C) Close cabinet door

D) Select „Cool Down

E) Press core temperature key for 10 sec.

F) „CLEn“ will show in cabinet temperature display

G) Press timer key 1x; Cleaning program starts automatically

(open cabinet door and rinse interior cabinet after

40 min.)

Close door again. Since Software version C1-06-05

a 10 min step hot air will follow to dry the interior cabinet.)

H) After end of program, leave cabinet door open over night.

This should be done after each installation to verify free drain connec-

tion and before disconnection the unit for storage.

A) Open cabinet door

B) Select „Cool Down“

C) Press core temperature key for 10 sec.

D) „CLEn“ will be shown in cabinet temperature display

E) Select „SC“ with temperature dial

F) Close water tap

G) Press timer key 1x and remain on „Cool Down“ position for

about 45 sec.

A) Open cabinet door

B) Select „Cool Down“

C) Press core temperature key for 10 sec.

D) „CLEn“ will be shown in cabinet temperature display

E) Select „CALC“ with temperature dial

F) Press timer key 1x and follow procedure of the

decalciﬁ cation instruction. (See user manual CM).

1. Cleaning program

2. Empty steam generator

3. Select descaling program

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 185 186

Pas de commentaire

Rational CombiMaster CM Manuel d'utilisateur Page 8